On 25 Dec 99, at 0:33, hamid reza fardar wrote:

> I have a DFI Motherboard model P2BLX ver A+-  , I heared that This
> mother board upgrade  to 600 MHz . Now i can set it to 433MHz .
> Who can help me to solve thid problem ?

  433 MHz is 6.5 x 66 MHz.  To set the board to 600 MHz, you need to
change the bus speed up to 100 MHz, and then a multiplier of 6x will
do it.

  Is this the system with the Celeron 300 in it?  Your Celeron is
locked at a 4.5x multiplier, yielding 300 MHz when the bus is set to
66 MHz.  If you have PC100-rated SDRAM, you may be able to set the
bus for 100 MHz and your Celeron -- if it works at that setting --
will be running at 450 MHz.  [Neither Intel, nor I, will *guarantee*
that this will work, but you could get lucky.]

David G

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>