Originally From: Harvey Rose <[log in to unmask]>
> What is the best way to install this floppy drive? I have 3 IDE connections
> available. Two on the mother board and 1 on the sound card. Since the LS120
> is IDE Atapi, should I install it has a master drive or leave it as CS.
> Should the hardrive be a slave? Can one install a regular floppy drive also
> and have one has A and the other as B?

Less than Win95b requires drivers, and has some limitations.
My instructions warn about this "slow" device affecting a hard
drive on the same cable.  I never tried it as a master.
"Full" BIOS support required if you want to boot from the LS-120.
You can have a real floppy and an LS-120. My LS-120 is "B" when
installed this way. (The system requires "A" for the real floppy.)
I have a "bad feeling" about anything other than a "plain" ide cd rom
on your sound card port.             Good luck,  Rick

         The PCBUILD web site always needs good submissions.  If
          you would like to contribute to the website, send any
               hardware tech tips or hardware reviews to:
                           [log in to unmask]