Have you tried setting the 6X drive as master and the CD/RW as slave? What
about moving the 6X cd to the primary IDE channel? Unfortuately, I have run
into several combinations of CD drives that I could never get to work as
master/slave together. Recently, I have had problems with a combo of a Sony
CD/RW and a Creative CD that I never could solve. I ended up changing the
Creative CD for a Sony and the system was happy.

-----Original Message-----
From: Dana S. Dufield [mailto:[log in to unmask]]
Sent: Tuesday, September 10, 2002 5:49 PM
To: [log in to unmask]
Subject: [PCBUILD] Adding a second CD-ROM


I've been trying to install a second CD-ROM to my 1.4GHz Athlon system.  My
existing  CD-RW is recognized as Master on the IDE2 controller but if I try
(snip)
 I've tried all combinations of jumper pin placement on the 6X but none seem
to solve the problem.  I'm stumped.

                         PCBUILD's List Owners:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>

                  Visit our website regularly for FAQs,
               articles, how-to's, tech tips and much more
                          http://freepctech.com