The ISA SCSI card(DTC), it's a self terminated card, that is why you don't
have any SCSI terminators on the scanner. Connect the scanner to your
Adaptec 2906, no terminators needed on the back of the scanner.

Enter the Adaptec BIOS(Ctrl+A) and terminate the external connector.

HTH.

 Jonathan Navarro
 ACER TSR.

-----Original Message-----
From: PCBUILD - Personal Computer Hardware discussion List
[mailto:[log in to unmask]]On Behalf Of Dave Gillett
Sent: Sunday, October 31, 1999 5:26 PM
To: [log in to unmask]
Subject: Re: [PCBUILD] scsi terminator


On 29 Oct 99, at 10:08, [log in to unmask] wrote:

> Just over a year ago I purchased an ACER 310S Scanner.  It came
> with an ISA SCSI Card which is working well.  I recently purchased
> an Adaptec 2906 PCI SCSI Card to replace my orginal.  While reading
> thru the manual,  references are made to a SCSI terminator on the
> last external device.  The scanner I have did not come with a
> terminator and does not have one installed.
>
> While looking up the price of a terminator, I discovered a wide
> selection of terminators.   This made me even more confused.
>
> My question is, what type of terminator should I get.  The scanner
> is my only external device.

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>