HI Ubiratan C. Peleteiro
You might want to try the following semi-universal driver for your CD-ROM
      if you can not find the exact one. I find that it seems to work for
      most IDE type CD-ROM

The following is a copy and paste of the driver that may be helpful.

Later
[log in to unmask]

Subject:  [PCBUILD] "Universal" CD-ROM driver & boot disks




Javier - to answer your question about the interest in DOS CD-ROM drivers:
Many
of us on this list are computer consultants and technicians.  It is *very*
handy for us to have a Win95 boot disk that will recognize and initialize
the
CD-ROM on most Win95 systems. Often the reason we are working on a client's
computer is because the hard drive died, or Windows died, and we need that
DOS
CD-ROM driver to be able to deal with those problems.

Everyone else:  For those of you want or need the semi-universal CD-ROM
driver
that I have found recognizes most modern CD-ROM's, I have posted it on my
FTP
site at:

ftp://ftp.connectnet.com/pub/users/r2sys/outgoing/

The file name is D011V200.SYS

The statement I use in the config.sys on my 3.5" floppy disk is:

device=d011v200.sys /D:MSCD001

...and the corresponding statement in the 3.5" floppy disk's autoexec.bat
is:

a:\mscdex.exe /D:MSCD001

Note:  I also have himem.sys loading in the config.sys on the bootable
floppy.
 At least one of the Win95 versions wants himem.sys in order to load (I
*think*
Win95B).  That statement is:

device=himem.sys

Of course, all three files (d011v200.sys, mscdex.exe, and himem.sys) reside
in
the root of the 3.5" floppy.

Roxanne Pierce
R2 Systems, San Diego
mailto:[log in to unmask]




Subject:  [PCBUILD] CD-rom driver




Does anyone know where i can find the Sony cdu76e driver for DOS?
It'an IDE CD-ROM drive and i couldn't find the drive at Sony Site.

TIA,
Ubiratan.