To set external CPU frequency to 112MHz versus the standard 100MHz normally
used for a 350, change jumper CLK2 from pins 1-2 to pins 2-3 (ref. your
VA503+ manual).  This will run at effectively 112 times 3.5 = 392 MHz, which
is more stable than trying 100MHz at 4.0.  Keep in mind, though, that this
board can use a K6-2 450, which is $50 shipped right now, which will be
faster and more reliable than the 350 over clocked to 375 (although you may
require a BIOS flash to use a 450 properly depending on your board version).

You may (likely) experience instability on this motherboard at 112 external
bus frequency.
([log in to unmask])
-----Original Message-----
From: PCBUILD - Personal Computer Hardware discussion List
[mailto:[log in to unmask]]On Behalf Of Chan Fan Chong
 I remember read a list over here regarding OVERCLOCK the AMD K6-2 350 MHz
on FIC VA-503+ M/B.

                  Visit our website regularly for FAQs,
               articles, how-to's, tech tips and much more
                  http://nospin.com - http://nospin.org