PCBUILD Archives

Personal Computer Hardware discussion List

PCBUILD@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
John Sproule <[log in to unmask]>
Reply To:
PCBUILD - Personal Computer Hardware discussion List <[log in to unmask]>
Date:
Sun, 10 Oct 2004 08:17:40 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (63 lines)
Perhaps the motherboard is having trouble figuring out what to do with the
mobile processor.  If you haven't already, clear the CMOS and try again.
Also, make sure that you have the CPU fan plugged into the CPU header on the
motherboard.

This may be what you are doing, but I would have only video card, memory and
processor installed in the motherboard at this point, and I would have only
the keyboard plugged into the back of the case.

Maybe pick up the case and roll it around a bit to make sure you don't have
a loose screw floating around, just for good measure.

Are you confident that you have the CPU heatsink installed properly?  Are
you using a shim?  Those can sometimes cause a problem if they aren't
exactly the right size.

Since the keyboard lights flash at least once, you are beginning the boot
process, but it seems like things shut down before you get very far.  I
don't know if this gets far enough for you to enter the BIOS; usually, the
option to hit the delete key comes up very soon after the keyboards light
flash.  But with the mobile processor, I'm almost certain that you'll have
to manually configure the bus speed, multiplier, and core voltage; though,
it should default to something that is at least bootable.

John

----- Original Message -----
From: "Michael Eisenstadt" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, October 09, 2004 12:26 PM
Subject: Re: [PCBUILD] RAM slot question on an Asus A7N8X-X board


>I went with the majority and inserted the RAM
> in the back slot.
>
> Unfortunately, at this point the computer will
> not POST.
>
> The components are Asus A7N8X-X board,
> Athlon XP-M 2400+, 512MB RAM in a new
> Enermax EG365P-VD case & power supply.
>
> When power is switched on the back of the
> power supply, an LED on the board turns on
> but the power supply fan does not start up.
> When the ATX power button on the front of
> the case is pressed (the leads from the button
> are attached to the board), the fan starts up
> and runs for about 5 or 6 seconds and then
> turns off. While the fan is turning the 3 keyboard
> lights do flash on and off.
>
> Does this description suggest what might be
> wrong?
>
> I haven't attached a HDrive but shouldnt the
> computer POST without a harddrive?

           The NOSPIN Group is now accepting donations to help
          defer the costs of providing PCBUILD and our website.
           Visit http://freepctech.com to donate using PAYPAL

ATOM RSS1 RSS2