Jumper settings all look right.  I probably will be pulling the cpu out of
my pc to test this problem, I'm hesitating, but realize this probably needs
to be done to see whether the mb or cpu is the problem. I'm just a little
nervous since my pc is running perfectly, and I don't like touching anything
if its working fine.    Al
----- Original Message -----
From: "Louise Gainor" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, July 31, 2002 8:13 AM
Subject: Re: [PCBUILD] Newly Built PC Freezes


> Your right, if your freezing up in the BIOS and the computer won't POST,
you
> have a hardware problem. Since you've already checked all of the cables
and
> other usual suspects, could it be that the jumper setting itself is
causing
> the problem?
>
> ----- Original Message -----
> From: "Al Gurdcilani" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, July 30, 2002 6:35 PM
> Subject: Re: Newly Built PC Freezes
>
>
> > I originally thought about this, but then I thought that Windows
couldn't
> have caused this confusion due to the fact that the system freezes while
in
> bios.  Correct me if I'm wrong, but my assumption is that if I'm not yet
in
> Windows it couldn't be the cause.  Please tell me I'm wrong, that by far
> would be the simplest solution to this crazy problem.  If you confirm that
> there is a hint of a possibility of this, I'll reinstall it immediately.
> AL
>
>                   Visit our website regularly for FAQs,
>                articles, how-to's, tech tips and much more
>                           http://freepctech.com

                  Visit our website regularly for FAQs,
               articles, how-to's, tech tips and much more
                          http://freepctech.com