For PC100 mobo, as long as you set the COMS jumper (usually a red jumper) to
normal, and have a function CPU (if the mobo has both slot1 and socket370,
you will need to set the CPU select jumper <usually a white jumper>
correct), a good RAM which is pluged in the first memory slot (DIMM 1), it
should post. If there is nothing metal shorted mobo (check the case), then
you have a dead mobo.

Jun Qian

----- Original Message -----
From: "Mark Wo" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, September 20, 2000 12:30 AM
Subject: [PCBUILD] Motherboard with SiS 530 chip


> You were right, it did turn out to be a
> PCChips (M599LMR) MB.  I got the manual and printed it, set
> the jumpers yet I get no video.  At least now the power supply,
> lights,fans and hard drive power up.  It has built in AGP graphics.
> Is there anything that I missed or could try to get the monitor to
> come on?

                  Visit our website regularly for FAQs,
               articles, how-to's, tech tips and much more
                  http://nospin.com - http://nospin.org