Hi,
    I have a Mustek MFS-6000CX SCSI ISA scanner with its own SCSI ISA card. The cable end that connects to the SCSI card is the same 25 pin connections that is on the end of a printer cable that connects to the computer. (Yes it is SCSI, not parallel).
     My new motherboard has no ISA slots, so I now cannot use my scanner. I have a SCSI 250 Zip drive with a PCI SCSI card. I tried connecting the scanner from the output socket on the Zip but it did not work. I then tried to connecting it in the middle of the chain, but the scanner was still not recognized by the computer nor the Scanner Install program software. The terminator was set each time, the end unit on and the middle unit off. The scanner's cable will not connect direct to the Zip's SCSI card so I was not able to try this. This has been my total experence with SCSI, but I feel at ea
se working on the computer otherwise. I very well might not be doing something right.
     Is there a SCSI PCI card that will work on both my Zip and Scanner? Or is there one that will work with my Scanner? I do not understand the difference in the SCSI cards that I see advertised. I do not know which type I need, etc.
    If someone that understands SCSI could point me in the right direction, I would be very thankfull!
    Mustek did not respond to my questions. I quess my ISA scanner is no longer suported.
     Thank you for any help....I really need it...
Lawrence Richards

                         PCBUILD's List Owners:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>