I know that older ATX motherboards would show this behavior if the
processor was not installed, or in the case of slot-1 type processors,
not seated firmly.   I'm sure that the processor is a socket type, but
you could try re-seating it or swapping in another one.  Unfortunately I
think you'll need to swap some parts to track this down.  Try connecting
motherboard, Power supply, memory, processor, video card, keyboard and
floppy drive.  This bare combo should work before connecting other
peripherals.

Likely the power supply itself, the board, or the processor is the
culprit.

Eric Wertman

-----Original Message-----
From: PCBUILD - Personal Computer Hardware discussion List
[mailto:[log in to unmask]] On Behalf Of mwathen
Sent: Tuesday, July 09, 2002 12:41 PM
To: [log in to unmask]
Subject: [PCBUILD] how do i verify that my power supply works?


I am building a computer from scratch.  I have connected my power supply
to my motherboard and, after turning it on, have gotten no response.  I
unhooked my hard drives, cd rom, sound and graphics cards, and memory.
The only thing connected is my motherboard, power supply, and processor
(athalon
2100+) with heatsink.  The voltage is correct (115 in USA), the outlet
works, and the cords work. Any suggestions?

thanks,
~Michael Wathen

                         PCBUILD's List Owners:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>

                         PCBUILD's List Owners:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>