BULLAMANKA-PINHEADS Archives

The listserv where the buildings do the talking

BULLAMANKA-PINHEADS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reply To:
The listserv which takes flossing seriously! <[log in to unmask]>
Date:
Wed, 9 Nov 2005 14:25:45 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (84 lines)
I know I have seen it, but have not really taken an up-close look. Given the
construction date there is about a 75% likelihood that the original mortar is
Rosendale cement, which could very well be in good condition after 130 years.

Edison Coatings, Inc.
Michael P. Edison
President
3 Northwest Drive
Plainville, CT 06062
Phone: (860) 747-2220 or (800)697-8055
Fax: (860)747-2280 or (800) 697-8044
Internet: www.edisoncoatings.com
E-Mail: [log in to unmask]

---------- Original Message -----------
From: [log in to unmask]
To: [log in to unmask]
Sent: Wed, 9 Nov 2005 13:12:15 -0500
Subject: Re: [BP] [forum-l] Primer for Rusty Metal Surfaces

> The building was restored a long time ago (my guess is early 70's),
>  and if it was pointed, it was done very well.  Leading me to think it
> probably wasn't pointed.  If you haven't seen it, Mike, you must do so
> on your next visit. Ralph
>
> -----Original Message-----
> From: edison <[log in to unmask]>
> To: [log in to unmask]
> Sent: Wed, 9 Nov 2005 11:11:28 -0500
> Subject: Re: [BP] [forum-l] Primer for Rusty Metal Surfaces
>
> So speaking of butchering things, was this building repointed and what
> was used?
>
> Edison Coatings, Inc.
> Michael P. Edison
> President
> 3 Northwest Drive
> Plainville, CT 06062
> Phone: (860) 747-2220 or (800)697-8055
> Fax: (860)747-2280 or (800) 697-8044
> Internet: www.edisoncoatings.com
> E-Mail: [log in to unmask]
>
> ---------- Original Message -----------
> From: Jim Follett <[log in to unmask]>
> To: [log in to unmask]
> Sent: Wed, 9 Nov 2005 08:58:45 -0600
> Subject: Re: [BP] [forum-l] Primer for Rusty Metal Surfaces
>
> > Thanks, I would have voted forit, but I'm not that old, great building.
> >
> > Jim
> >   -----Original Message-----
> >   From: The listserv which takes flossing seriously!
> > [mailto:[log in to unmask]]On Behalf Of
> > [log in to unmask]
> >   Sent: Wednesday, November 09, 2005 8:45 AM
> >   To: [log in to unmask]
> >   Subject: Re: [BP] [forum-l] Primer for Rusty Metal Surfaces
> >
> >   In a message dated 11/9/2005 9:29:11 AM Eastern Standard Time,
> > [log in to unmask] writes:
> >     Ralph:  Do either of you have a picture of this building, for
> > those of us on the other side of the Mississippi?   Sheltered Life
> >
> >   This was voted one of the ten best american buildings in 1886 or so.
> >  But then, they were only asking architects.  Interior positively
> > butchered in a 1960's "restoration".
> >
> >   c
> ------- End of Original Message -------
>
> --
> To terminate puerile preservation prattling among pals and the
> uncoffee-ed, or to change your settings, go to:
> <http://maelstrom.stjohns.edu/archives/bullamanka-pinheads.html>
------- End of Original Message -------

--
To terminate puerile preservation prattling among pals and the
uncoffee-ed, or to change your settings, go to:
<http://maelstrom.stjohns.edu/archives/bullamanka-pinheads.html>

ATOM RSS1 RSS2