John,
I thought it was, but it's been a long time so I'm not sure. I gave up on
that method anyway because it's a lot easier to work with the software.
Steve
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, March 01, 2011 11:08
Subject: Re: thf6a weather channels
> are you sure it's one click form the 0? I thought that was the priority
> channels, unless it's different from band A to b, I haven't used my thf-6A
> in a while I should dig it out and run it again someday after I get rid of
> this cold or flu or whatever's going around the second floor of this
> building.
> ----- Original Message -----
> From: "Steve Dresser" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, March 01, 2011 10:40 AM
> Subject: Re: thf6a weather channels
>
>
>> Darren,
>>
>> I can think of only two ways to get them back, and neither of them are
>> very
>> nice. The most obvious way is to do a full reset of the radio, which
>> will
>> wipe out all the memories you've saved, but it will restore the factory
>> defaults. The second way is to start at memory 0, go to VFO mode, press
>> Function and turn the tuning control one click to the left, which will
>> put
>> you into the tenth weather channel memory. Then press Memory to store
>> the
>> frequency in that memory. Repeat this procedure, turning the tuning knob
>> one click to the left for each memory you want to fill. Like I said,
>> it's
>> not pretty, but it's the only way you can do it without using the
>> computer.
>>
>> Steve
>>
>> ----- Original Message -----
>> From: "Darren Tomblin" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Monday, February 28, 2011 00:30
>> Subject: thf6a weather channels
>>
>>
>>> Hi, I have a question about the weather channels on my thf6a. some how =
>>> they got removed probably when I was saving something to memory. does =
>>> anyon know how I can get them back. I don't have a way to connect it to
>>> =
>>> the computer to do it. thanks in advance. Darren
>>>
>
|
