BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Lloyd Rasmussen <[log in to unmask]>
Reply To:
Lloyd Rasmussen <[log in to unmask]>
Date:
Mon, 1 Feb 2016 20:44:44 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (57 lines)
The rules haven't always been what they are now.
In 1973, while I lived in Cedar Rapids, Iowa and held the call K0DDA, a
local club used my call for a multi-op Field Day operation. I don't know how
many QSOs we made on phone or CW. But I was operating 40 CW on Sunday
morning and answering various CQs. After the contest I got a citation from
the FCC monitoring station in Grand Island, Nebraska because I had not fully
identified (his call and my call) on each transmission for several QSOs. It
turned out that several stations were cited by the same engineer at the same
monitoring station on the same Sunday morning; apparently he had gotten
bored. This conduct resulted in protests from a lot of contesters, and the
rules were changed a couple of years later.
73,

Lloyd Rasmussen, W3IUU, Kensington, MD
http://lras.home.sprynet.com
-----Original Message----- 
From: Tom Behler
Sent: Monday, February 01, 2016 7:45 AM
To: [log in to unmask]
Subject: Re: identification requirements/

What is interesting is that, say in a contest, if a station  is responding
to a CQ, the responding station often gives its call, and then after the
station calling CQ gives its report, the responding station gives its
report.  When responding to a contest CQ, I always used to put my call sign
at the end of the transmission where I give my report, but no one seems to
do that any more.  Then again, contest contacts are so short that it may not
matter.

Tom Behler: KB8TYJ


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Ron Canazzi
Sent: Monday, February 01, 2016 12:16 AM
To: [log in to unmask]
Subject: Re: identification requirements/

Hi Tom,

As far back as I can remember, the only requirement for US hams as far as
call sign identification is to state your call sign every ten minutes and at
the end of your transmission.  By end of transmission, I mean just before
you sign off.


On 1/31/2016 11:06 PM, Tom Fowle wrote:
> Hi all,
> Now I get to slightly embarrass my self.
> Are U.S. licensed hams still required to send both own call and call
> of station with whom we're attempting to communicate both at beginning
> and end of exchange? as well as every 10 minutes during long qsos?
> TNX&73
> Tom Fowle WA6IVG
> 

ATOM RSS1 RSS2