I fixed it.  It was my offsets.  They were WAY off.  Thanks to all.

73,
Richard KK6MRH

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of John Miller
Sent: Thursday, October 09, 2014 4:49 AM
To: [log in to unmask]
Subject: Re: Cannot Transmit on 2M Band on Kenwood TS-2000 : (

Are you trying to do 2 meters on the main or sub side? The sub side will
only transmit in FM but I think will receive in AM so maybe you got it in
AM? If so, just hit the AM/FM button, lower of the 3 mode buttons just left
of the tuning dial. IF it's the main side, is it possible your transmit is
out of band? Either you're out of band completely or at the top of the band
with a plus offset putting transmit out of band? Is it possible it is
transmitting but maybe with a PL tone or wrong offset for what you want to
do? Just thoughts.
----- Original Message -----
From: "Richard B McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, October 08, 2014 11:44 PM
Subject: Cannot Transmit on 2M Band on Kenwood TS-2000 : (


> Hi,
>
>
>
> Very frustratingly, I cannot transmit on the 2M (VHF) band.  
> Strangely, on other bands (e.g., 70cm, 10M, etc.) I have no trouble 
> transmitting.  I can receive just fine on the 2M band.  But, when I 
> key-down on the mic, nothing happens!  It is like the transmit 
> function is somehow frozen-out on this band only.  Earlier today, 
> everything was fine, but it is somehow now not working.
>
>
>
> Please help me.  I do not think there is anything mechanically wrong 
> with the rig.  I suspect that I have inadvertently pressed some button 
> that is causing this.  I am stuck and dumbfounded : (
>
>
>
> 73,
>
> Richard KK6MRH