BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Tom Behler <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Tue, 11 Dec 2012 19:46:52 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (69 lines)
    Steved:

Yes, the TS480 cable is now connected to the same jack on the rig runner as 
the old TS590 cable was.

But, your idea of checking and possibly replacing the fuses on the original 
cable is a good one.

That cable has been around the block a time or two, so perhaps its time has 
come.

I'll also check the Anderson power pole connections.

Tom Behler: KB8TYJ

----- Original Message ----- 
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, December 11, 2012 7:20 PM
Subject: Re: TS590 reduced output power problem solved


> Tom,
>
> Good news.  Glad you didn't send it back to Japan.  You might want to
> pull the fuses out of the "bad" cable, and be sure they are reinserted
> good and snug.
>
> If I remember right, you are using a rig runner for 12 volt stuff.
> Maybe the power poles on the end of that cable are the culprit?    Was
> the cable from the 480 connected to the same jack of the rig runner?
>
> Glad it is working.
>
> 73, Steve KW3A
>
> On 12/11/2012 7:01 PM, Tom Behler wrote:
>> Hi, all.
>>
>> Well, I'm happy to report that I have solved the problem of reduced power
>> output on my TS590.
>>
>> The culprit was my DC power cord.
>>
>> I braved the 25 degrees and snow here, and took a trip out to the RV to
>> retrieve the power cord to my TS480.  I exchanged power cords, and voila:
>> the TS590 put out a solid and consistent 100 watts, as read by the rig's
>> watt meter.  My LDG TW1 gave me a slightly lower reading of 90 watts, but
>> I'm not going to worry about the extra ten watts, since that difference
>> might be a factor of the lack of accuracy of the LDG.
>>
>> So, my advice to everyone would be to check your DC power cords, since 
>> the
>> 590 is obviously very sensitive to the slightest problem, and will cut 
>> power
>> back accordingly.
>>
>> Now, I guess I'll either need to buy another power cord for the TS480 out 
>> in
>> the RV, or try to figure out what is wrong with my defective cord.
>>
>> Thanks to all for allowing this thread to evolve over the last day or so.
>>
>> 73 from Tom Behler: KB8TYJ
>>
>>
>>
> 

ATOM RSS1 RSS2