I was wrong in my earlier post, however, not in all cases. I believe you
can not change the TOT while in cross-band mode, or for it.
Fred Olver [log in to unmask]
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, September 17, 2005 9:01 AM
Subject: Re: tmv7a question
> there is no off setting on the TM-G707A and I think it's the same basic
> menu
> setup, with a few added settings for stuff the V7A has the other doesn't.
> I
> just keep mine set at the default, what ever it is, 10 minutes maybe? or
> might even be 5.
> ----- Original Message -----
> From: "Colin McDonald" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, September 17, 2005 12:41 AM
> Subject: Re: tmv7a question
>
>
> ok i checked it for you.
> It is section #14.1 in the manual
> Go to menu number 11, TOT and press the set button, which, in the menu
> mode
> is the Reverse button, the second one over from the right in the group of
> four buttons...immediately beside your RF power selecter button.
> Anyway, this button is the set button and you can toggle from 3, 5 and 10
> minute time out defaults. There is probably an off setting there as
> well....are you running cross band or using the rig for echolink or IRLP
> that you need more then ten minutes of TX time?
> 73
> Colin, V A6BKX
> ----- Original Message -----
> From: "Colin McDonald" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, September 16, 2005 10:30 PM
> Subject: Re: tmv7a question
>
>
>> check out the tm V7A manual at
>> www.icanworkthisthing.com
>> under the amateur radio link, and then dual band transceivers, and then
>> TM
>> V7A manual.
>> Look under section 14 and find the Time out Timer on off procedures.
>> Its a menu item so you may or may not need sited assistance...depends on
> if
>> you remember the last menu you were in.
>> Another way is just do a partial reset, turn radio off, hold down VFO and
>> turn the radio on, then hit the vfo button again to complete.
>> This will reset all menu defaults but will not erase memory.
>> Remember, if you do a partial reset, the mike buttons wont work until you
>> turn microphone on in menu 16 again.
>> All directions for this are in the manual or i have created a
> comprehensive
>> cheat sheet to do it as well. Doing a partial reset will turn the time
>> out
>> timer off and set you back to menu 1 so you can count clicks to the
>> appropriate menus that you want
>> If you have big difficulties just call me on skype my screen name is
>> greatcanadian
>> 73
>> Colin, V A6BKX
>> ----- Original Message -----
>> From: "Kevin Kwan" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Friday, September 16, 2005 8:03 PM
>> Subject: tmv7a question
>>
>>
>> > This is a multi-part message in MIME format.
>> >
>> > ------=_NextPart_000_007D_01C5BB0A.6B655FC0
>> > Content-Type: text/plain;
>> > charset="iso-8859-1"
>> > Content-Transfer-Encoding: quoted-printable
>> >
>> > Not that this is necessary but is there a way to disable the tot on
>> > this
> =
>> > rig, thanks?
>> > ------=_NextPart_000_007D_01C5BB0A.6B655FC0
>> > Content-Type: text/html;
>> > charset="iso-8859-1"
>> > Content-Transfer-Encoding: quoted-printable
>> >
>> > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>> > <HTML><HEAD>
>> > <META http-equiv=3DContent-Type content=3D"text/html; =
>> > charset=3Diso-8859-1">
>> > <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
>> > <STYLE></STYLE>
>> > </HEAD>
>> > <BODY bgColor=3D#ffffff>
>> > <DIV><FONT face=3DArial size=3D2>Not that this is necessary but is
>> > there
> =
>> > a way to=20
>> > disable the tot on this rig, thanks?</FONT></DIV></BODY></HTML>
>> >
>> > ------=_NextPart_000_007D_01C5BB0A.6B655FC0--
>> >
>>
|
