Subject: | |
From: | |
Reply To: | |
Date: | Tue, 23 Oct 2001 13:40:23 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Phil, that is what got me last summer on my 40 footer. the ropes had =
rotten due to UV exposure and the one g5rv did not provide enough support =
in the proper directions to keep the tower from twisting and folding over =
at the too level. this is about 12 feet up the mast. the base was on my =
deck with a flange around its' base about 4 foot above ground level which =
puts the roof bracket 16 feet above ground level at the base of the tower. =
my lot is sloping so the actual tie down points were also slightly =
different as one was across a stream at the back and low point of my =
property. A cottonwood tree was used for this point about 8 feet above =
ground and kids reach. the other tie downs were on the roof eves of the =
house about 12 feet above ground level and 10 feet above the base of the =
tower. =20
A good question here is what guy medium (metallic and non-metallic) works =
in various situation masts, 25 g etc.?
Thank You!
BRETT K WINCHESTER PM KD7JN
[log in to unmask]
http://www.icbvi.state.id.us/brochure/RADIO.HTM=20
member IAAIS International Association of Audio Information Services
VOLUNTEER & READING SERVICES MANAGER
ICBVI - IDAHO COMMISSION f/t BLIND & VISUALLY IMPAIRED
P O BOX 83720
BOISE IDAHO 83720-0012
208-334-3220 ext 104 or 103 +7 =3D voice mail non-business hours
fax 208-334-2963
>>> Phil Scovell <[log in to unmask]> 10/23/01 01:36PM >>>
Before I put up two rohn 25G towers, I had a radio shack 40 foot push up
mast. I had it bolted to the back of the house at the roof level and my =
80
and 40 meter inverted V antennas on it. No guys except, of course, for =
the
antennas themselves.
Phil
k0nx
|
|
|