As I recall, you move two jumpers, set of three pins with two jumpered, 
severe c r s, but I think that is right, again I mention these are much 
much smaller than the ones we're use to working with in computers.
73
Butch
WA0VJR
Node 3148
Wallace, ks.


On Fri, 
30 Jan 2015, Jim Gammon wrote:

> Butch, do you move a jumper from one set of pins to another, or
> do you cut a jumfer? Jim WA6EKS
>
> ----- Original Message -----
> From: Butch Bussen <[log in to unmask]
> To: [log in to unmask]
> Date sent: Fri, 30 Jan 2015 06:19:47 -0800
> Subject: Re: ts-590 broadcast band
>
> See my previous note, I don't recall exactly where the jumpers
> are, I'll
> see if I can find jumper numbers though.
> 73
> Butch
> WA0VJR
> Node 3148
> Wallace, ks.
>
>
> On Thu, 29 Jan 2015, Tom Behler
> wrote:
>
> Butch:
>
> Can you send the procedures for this mod for the TS590?
>
> I'd also be interested in the procedures for the TS480 if they
> are out there
> somewhere.
>
> Tom Behler: KB8TYJ
>
>
> -----Original Message-----
> From: For blind ham radio operators
> [mailto:[log in to unmask]]
> On Behalf Of Butch Bussen
> Sent: Thursday, January 29, 2015 11:10 AM
> To: [log in to unmask]
> Subject: Re: ts-590 broadcast band
>
> I did it on my 590 and it did help a lot, not very close to
> strong stations
> though.  I had to get sighted help, first to find the jumers,
> and second
> they are very very small.
> 73
> Butch
> WA0VJR
> Node 3148
> Wallace, ks.
>
>
> On Thu, 29 Jan 2015, Howard Kaufman
> wrote:
>
> I hear there is a mod to increase the kenwood sensitivity on the
> broadcast band.
> Has anybody tried this on the 590 or 480, and what do you think?
>
>