You can do what was suggested here but honestly, I find the older radios
have a lot more punch no matter what you do, then do the newer radios. Even
my 940 had more then the 570 and it's just the way they're made it just
doesn't have it
----- Original Message -----
From: "Louis Kim Kline" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, February 13, 2005 2:38 PM
Subject: Re: output


> Hi.
>
> Have you checked to see if increasing mic gain brings the power up.  Your
> mic may simply be under-driving that radio.  If your mic gain is full up,
> and you still aren't getting a lot of output, you might want to try a
> different mic.  If you still aren't getting a lot of output, I would
> question whether or not there is a problem with the radio.
>
> 73, de Lou K2LKK
>
> At 12:50 PM 2/13/2005 -0600, you wrote:
>>Noticed a disturbing thing this morning.  Compared the tune out put with
>>the ssb out put on my ts-480.  It seemed a lot lower on SSB.  So I made
>>the
>>same test using the Omni d.  Same marks if not a bit lower on the Omni,
>>but
>>much higher on SSB using the Omni.  Is this a charictoristic of newer
>>radios to make cleaner audio?  I don't know the difference in watts, just
>>listening on my tuning oscellator.  I figure running 100 watts, you need
>>every watt you can get on phone.    This is my first modern radio.  Well
>>actually I have had modern radios before, but modern then is thirty years
>>ago now.
>
> Louis Kim Kline
> A.R.S. K2LKK
> Home e-mail:  [log in to unmask]
> Work e-mail:  [log in to unmask]
> Work Telephone:  (585) 697-5753
>