BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Lou Kline <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Fri, 10 Aug 2007 23:02:37 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (60 lines)
Hi.

Now there's a good application for having the programming software and 
cable, providing that you made a backup copy of your programming on your 
hard drive (which I did).  I don't know what you did either, and the 
biggest nuisance would undoubtedly be having to reprogram the dimmer butten 
again to operate the speech synthesizer.

73, de Lou K2LKK


At 08:38 PM 8/8/2007 -0400, you wrote:
>Is it possible the offsets were changed around? Or, maybe the cross band? so
>it's transmitting on another band, which can be changed by pushing the
>function button, and the band button. Low beep is normal, high beep is tx on
>the other band from where you're listening. Off set is function then rev,
>which is 2 over from the band button. Low beep is simplex, I forget the
>order of the others but cycling through will likely get what you want.
>Otherwise I wonder if there's something done in the menu.
>----- Original Message -----
>From: "Jim Kutsch" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Wednesday, August 08, 2007 8:20 PM
>Subject: TMG707A Stopped Transmitting
>
>
> > CQ TMG707A Experts,
> > I'm reaching out to all of you Kenwood TMG707A operators for some quick =
> > help.  I've been digging through the manual but finding no answer.
> >
> > My fairly new Kenwood TMG707A stopped transmitting.  I'm using =
> > preprogrammed channels that have worked fine for months.  When I push =
> > the PTT, the fan starts, the receiver cuts out, but there's no output at =
> > all.  I've verified nothing out by monitoring with another 2M rig. =20
> >
> > This problem started after several front panel buttons were pressed =
> > randomly.  It's almost like a transmit lock was activated but if so, I'm =
> > surprised that the fan still starts up.  I tried the directions for =
> > keypad lock/unlock but no success.  Any ideas what happened and how to =
> > recover?  I could do a reset to factory defaults but I hate to lose all =
> > of my frequency and PL programming.
> >
> > Thanks
> > 73,
> > Jim, KY2D
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.476 / Virus Database: 269.11.13/946 - Release Date: 8/10/2007 
>3:50 PM

Louis Kim Kline
A.R.S. K2LKK
Home e-mail:  [log in to unmask]
Work e-mail:  [log in to unmask]
Work Telephone:  (585) 697-5753 

ATOM RSS1 RSS2