Kevin,
Per the 2000 manual mc43s, 47, 60a, 80,  85 and 90 are compatible. If one of
those has dtmf get MFJ-1262 mic switch to choose between two mics with
ts2000. Warning you or someone may have to configure jumpers to utilize foot
switch. I had to when I helped another ham install his. Be sure to get 8-pin
version not modular-plug model since ts2000 uses old 8-pin mic connecters.
Lynn
[log in to unmask]
----- Original Message -----
From: "Nathan, Kevin" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, June 16, 2003 2:36 PM
Subject: Portable DTMF Pads


> Hi All,
>
> I think I posted here a couple of weeks ago about this but haven't had any
> luck so will try again.  I am using my Kenwood TS-2000 for both hf and
> vhf/uhf use at my home qth.  I want to use IRLP and be able to access any
> link I choose.  I can enter numbers into the DTMF memory of my 2000 but,
as
> accessible as this rig is, that is one area where it seems impossible to
> program as a blind guy.
>
> What I want to find is some sort of small, portable box which has a
> touchtone pad and speaker in it which I can hold up to my mic and generate
> the necessary tones to bring up IRLP links.  I have checked with Radio
Shack
> and the only thing they seem to have available is a discontinued memory
> dialer which connects to the phone line for dialing numbers programmed
into
> it.  This doesn't seem to be what I need.
>
> Does anyone on the list have such a device or have a handle on where I
might
> find one?
>
> Thanks much and very 73 to all.
>
> Kevin Nathan, Independent Living Coordinator
> Dept. of Services for the Blind
> 3411 S. Alaska
> Seattle, Wa 98118
> Voice:  (206) 721-6450
> Cell:  (206) 604-4767
> Toll Free:  (800) 552-7103
> Fax:  (206) 721-6403
> Email:  [log in to unmask]