When I had mine, I did every time. I don't know why, but that's 1 of the 
things I remember about it still.
----- Original Message ----- 
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, April 12, 2007 11:09 AM
Subject: Re: ict90


> that isn't typical john.
> I program the ICt90 with the software all the time and i never have to
> reenable the cw read out.
> 73
> Colin, V A6BKX
> ----- Original Message ----- 
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, April 12, 2007 7:42 AM
> Subject: Re: ict90
>
>
>> Every time you program the radio with the software, when you're done you
>> have to reenable the CW read out.
>> ----- Original Message ----- 
>> From: "Richard Fiorello" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Thursday, April 12, 2007 10:20 AM
>> Subject: Re: ict90
>>
>>
>> > Hi John and list;
>> > I eventually figured it out.  I had the correct offset set but I 
>> > thought
>> > that the offset direction would be automatic based on the frequency.
> Once
>> > I
>> > manually checked plus or minus things worked out.  I hadn't needed to
> use
>> > that software in quite some time but although there were some 
>> > adventures
>> > it
>> > is certainly easier than doing each frequency manually.
>> > Somehow I managed to disable the cw read out and tv channels.  After
> some
>> > investigation both are now working but no idea how that happened.
>> > 73
>> > Richard
>> >
>> >
>> > ----- Original Message ----- 
>> > From: "John Miller" <[log in to unmask]>
>> > To: <[log in to unmask]>
>> > Sent: Wednesday, April 11, 2007 5:18 PM
>> > Subject: Re: ict90
>> >
>> >
>> > Do you have the right offset? not just plus or minus, but the right 
>> > step
>> > site for the offset?
>> > ----- Original Message ----- 
>> > From: "Richard Fiorello" <[log in to unmask]>
>> > To: <[log in to unmask]>
>> > Sent: Wednesday, April 11, 2007 6:59 PM
>> > Subject: ict90
>> >
>> >
>> >> Hi;
>> >> The good news is that for unknown reasons the software is now letting
> me
>> >> put
>> >> in and copy all the frequencies I want.  The bad news is that I don't
>> >> seem
>> >> to be hearing anything or hitting any repeaters.  I have put in the
> "pl"
>> >> tone and checked the tone box.  The attenuator is not checked and it 
>> >> is
>> >> on
>> >> high power.  I obviously changed some other setting that is causing a
>> >> real
>> >> problem. Under view I was looking under "common setting" and I suspect
>> >> that
>> >> may be a place to avoid.
>> >> Any ideas will be happily received.
>> >> Richard
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.446 / Virus Database: 269.2.0/756 - Release Date: 4/10/2007
> 10:44 PM
>>
>>