I know I previously said there wasn't, but does anyone know, on the tmv7a
how to make the menus talk? I said before that it was impossible. also is
there a way to make the voice synthesizer read you the tones.
----- Original Message -----
From: "Kenneth Lee" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, February 10, 2005 10:13 AM
Subject: Re: VHF radios and speech modules


> There are two ways of doing direct entry on the V7 (I think the same is =
> true
> on the 707). =20
>
> One way, your way I think, requires you to turn on the microphone remote
> control from the menus.  In this mode you can enter frequencies, set
> repeater reverse and much more from the keypad.  I don't like this mode
> because I often accidentally press some key on the mike and mess =
> everything
> up.
>
> I like to make the call key the enter key.  I don't use the call key =
> much
> anyway, and it is always there on the front panel if I need it.
>
> I don't know if using the "a" key (mike control turned on) will allow =
> you to
> enter a PL directly, but it most definitely works when using one of the =
> PF
> keys as the enter key.
>
> Try this... Go through the motions of programming a pl tone.  At the =
> step
> where you would scroll through the different tones, press the "a" key
> followed by the two digit code of the pl you want.  I'll send the ctcss
> tones in a separate message. =20
>
> Regards, Ken -N5SWR
> =20
>
> -----Original Message-----
> From: Blind-Hams For blind ham radio operators
> [mailto:[log in to unmask]] On Behalf Of Butch Bussen
> Sent: Thursday, February 10, 2005 8:30 AM
> To: [log in to unmask]
> Subject: Re: VHF radios and speech modules
>
>
> On my microphone, the a key says enter when I press it and I can enter
> frequencies.  Does this not work with pl tones?  I'm getting confused
> here.
> 73s
> Butch Bussen
> wa0vjr
>
> --=20
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.8.6 - Release Date: 2/7/2005
> =20