You should also get speech when changing the low and high cut settings. 
I think I have missed some of these posts.  Are you not getting any 
speech?
73
Butch
WA0VJR
Node 3148
Wallace, ks.


On Thu, 14 Nov 2013, Alan R. Downing wrote:

> My menu 15 is set to number 5.
>
>
> Alan R. Downing
> Phoenix, AZ
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Steve Forst
> Sent: Thursday, November 14, 2013 7:46 AM
> To: [log in to unmask]
> Subject: Re: 480 question
>
> Alan,
>
> My previous post assumes that the VGS-1 voice board is installed and is
> speaking.   Menu 15 needs to be set to something other than "off".
> This is the voice announcement volume, and of course if set to "off" you
> will get no speech.
>
> 73, Steve KW3A
>
> On 11/14/2013 9:10 AM, Steve Forst wrote:
>> Try setting menu 48 to number 61.    Since the 480 only has 1 pf key,
>> many of us will set the pf key to some other function and get frequency
>> readout by pressing the enter key twice  quickly.
>>
>> 73, Steve KW3A
>>
>> On 11/14/2013 8:52 AM, Alan R. Downing wrote:
>>> Does anyone on the list know how to restore the default action of the PF
>>> button?  The PF button is the button immediately below the power
>>> button on
>>> the upper left hand corner of the front panel.  My understanding is that
>>> pressing the PF button is supposed to speak the current frequency when in
>>> its default condition.  Mine does not.
>>>
>>>
>>>
>>> Thanks in advance for any help.
>>>
>>>
>>>
>>> KD7GC
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Alan R. Downing
>>>
>>> Phoenix, AZ
>>>
>>>
>>>
>>>
>>>
>
>