Amen. 


###
BRETT WINCHESTER
[log in to unmask] 
208-639-8386
###


-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]] On Behalf Of Steve Forst
Sent: Monday, August 06, 2007 4:36 PM
To: [log in to unmask]
Subject: Re: 2nd tower question

Brett,

Everything I know about towers I absorbed from the towertalk reflector
over the years.  Someone mentioned 80 percent.  That is the  number used
by Rohn and  whoever took them over a few years ago.  For a 100 foot
tower, the 
anchor points should be 80 feet out.  50 foot tower, 40 feet out.   The 
closer the anchor points are brought to the tower, the steeper the
angle, and the more compressive  / downward force is put on the tower
and it's base.

I also understand that while some crank-up's are designed to be guyed,
most are not and it's not wise to guy one that is not designed that way.

Whatever you do, do it safe.

73, Steve KW3A
----- Original Message -----
From: "Brett Winches" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, August 06, 2007 4:18 PM
Subject: 2nd tower question


> For same 50 foot crank up tower, what minimum guy angle between 45 and
x
> would be best.  I think I would prefer 45 but am curious as to what
> lower angles might also meet safety needs.  I expect not to go below
30
> and more likely 35 degrees. =20
>
> The system will be a set of 3 guy points. =20
>
> ###Thank you!
> Brett Winchester=20
> [log in to unmask]
> ICBVI -- Reading Services
> P O BOX 83720
> BOISE IDAHO  83720-0012=20
> 208-334-3220-104
> 208-639-8386 DID
> 208-334-2963 fax
> ###
>
>
>