Yeah be careful in RTTY  mode because you are really working it hard with
continuous duty.  Maybe it drops automatically to protect the radio. 


Barb K1EIR

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Phil Scovell
Sent: Monday, December 10, 2012 9:45 PM
To: [log in to unmask]
Subject: Re: TS590 Output Power again

Tom,

First, what's your reflected power.  Second, I don't own that radio but your
rig my be auto tuning the power down because you are testing it in the RTTY
mode which doesn't want to run at 100 watts continuous duty cycle.  That
happens to me in the AM mode checking power out.  A CW carrier works the
best.

Phil.



----- Original Message -----
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, December 10, 2012 6:56 PM
Subject: TS590 Output Power again


> Hi, all.
>
> I know this issue has come up several times already in different forms. In
> fact, I'm the one who brought it up once when I feared that my Astron RS35
> power supply was beginning to fail.  So please bare with me as I raise the
> question of TS590 output power again.
>
> It seems that my TS590 is intent on only putting out about 70 watts 
> output,
> even when the power output control is set at 100 watts.  In fact,
> interestingly, if I use the output power meter on the TS590, the output
> power reading given when I go beyond the 50 watt setting constantly sticks
> at 75 watts, whether I'm at a 55 watt setting, or a 100-watt setting.
> Readings are similar with my TW1.
>
> I've done this testing with two different power supplies, and with both a
> resonant antenna, and a dummy load.
>
> I'm taking my output power readings by setting the rig to RTTY mode, and
> pushing the push-to-talk button on my Heil Gold Line mic.
>
> Am I doing something wrong here?
>
> Is there a better way to measure output power with the TS590?
>
> Thanks and 73 from Tom Behler: KB8TYJ
>