you have the key pad locked, hold the function key for 1 second and that
should fix it.
----- Original Message -----
From: "Russ Kiehne" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, May 22, 2006 10:32 AM
Subject: Re: Storing a Frequency in TH-F6A Memory
> After pressing the 6 key, turning the tuning dial, the radio changed
> frequencies. Pressing the 6 key over and over again, I only get a high
> beep.
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, May 22, 2006 7:10 AM
> Subject: Re: Storing a Frequency in TH-F6A Memory
>
>
>> did you try turning up the volume on the B band? hitting the 6 key,
>> tuning
>> the dial up about 2 clicks? if not, I'd hate to say but you might have a
>> defect somewhere.
>> ----- Original Message -----
>> From: "Russ Kiehne" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Monday, May 22, 2006 10:05 AM
>> Subject: Re: Storing a Frequency in TH-F6A Memory
>>
>>
>>>I tried turning down the volume and pressing the moni key and no luck.
>>> I tried turning the squelch off and no go.
>>> I cannot change the status of the tone using the & 7 key. All I get is
>>> a
>>> high beep when I press it over and over again.
>>> ----- Original Message -----
>>> From: "John Miller" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Sunday, May 21, 2006 10:09 PM
>>> Subject: Re: Storing a Frequency in TH-F6A Memory
>>>
>>>
>>>> you might have got the squelch too high, the tones on for receive too,
>>>> or,
>>>> on the b band, you could have the volume for the B band too low, I
>>>> found
>>>> if
>>>> you turn the volume all the way down, and hit moni, as I recall, it
>>>> will
>>>> bring the volume back to match the other band while you hold the moni
>>>> button
>>>> so you might check that too. My moni button no longer works most of the
>>>> time, but when it does, I seem to recall that was the case when I
>>>> played
>>>> around with it.
>>>> ----- Original Message -----
>>>> From: "Pat Byrne" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Sunday, May 21, 2006 7:43 PM
>>>> Subject: Re: Storing a Frequency in TH-F6A Memory
>>>>
>>>>
>>>>> You might have gotten the receiver in the "other" tone decode mode;
>>>>> press the 7 key until you get the low beep and then you're sure to be
>>>>> in the "carrier" access mode.
>>>>> Pat, K9JAU At 05:26 PM 5/21/2006, you wrote:
>>>>>>Here's another thing interesting about this problem. On the b band, I
>>>>>>have
>>>>>>to hold the mono button to hear anything. I'm not sure what to do
>>>>>>with
>>>>>>the
>>>>>>radio now. I may have to get sighted help.
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>>
>
>
|
