Ok, what percentage do you want of my consultation fee?

Steve

----- Original Message ----- 
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, March 11, 2014 13:13
Subject: Re: Help with a TS480 issue.


> Thank you for your concurrence Doctor.  now you can bill him for a
> consultation.
>
> 73, Steve KW3A
>
> On 3/11/2014 12:24 PM, Steve Dresser wrote:
>> Steve,
>>
>> Although I couldn't remember the menu number, I agree with your 
>> diagnosis.
>> I can't think of any other button or setting that would make that happen.
>>
>> Steve
>>
>> ----- Original Message -----
>> From: "Steve Forst" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, March 11, 2014 04:10
>> Subject: Re: Help with a TS480 issue.
>>
>>
>>> Not sure this is the answer to your problem, but check menu 007.
>>> Default is "off".   If turned "on", memories are tunable with the VFO
>>> knob.
>>>
>>>
>>> If this menu is currently set to "off", then obviously it is something
>>> else.
>>>
>>> 73, Steve KW3A
>>>
>>>
>>> On 3/11/2014 1:46 AM, Jim Gammon wrote:
>>>> Hi listers.  I got my 480 into a strange mode where, when I go
>>>> into the memories, they are now hooked up to the VFO which I have
>>>> never experienced before.  Now, if I am in a programmed memory,
>>>> and tune the VFO, it will change the frequency.  I must have
>>>> punched a button, but I'll be darned if I can figure out what I
>>>> did to cause this, and would really like to put it back the way
>>>> it was before.  I bet the 590 has a similar feature just like
>>>> menu 34 effects the side tone on both rigs, at least I hope they
>>>> might be the same dealing with this problem.  73, Jim WA6EKS
>>>>
>>>>
>>>>
>>>
>>
>>
>>
>