Press "Rev" means to press the button that causes the input and output 
frequencies to be reversed (in other words, the fourth button from the 
left).

Steve

----- Original Message ----- 
From: "Howard Kaufman" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, May 25, 2013 22:29
Subject: Re: tmv-71


>        The automatic frequency checker sounds like a visual thing.
>
> From the manual
>
> Press [REV] (1s) to turn the ASC ON.
>
> When the ASC is ON, the icon will appear on the display.
>
> · While direct contact is possible, without the use of a repeater, the 
> icon
> will
>
> begin blinking.
>
> · To exit ASC, press [REV].
>
> Note:
>
> Pressing [PTT] will cause the icon to stop blinking.
>
> ASC does not function if you are using simplex operation.
>
> ASC does not function while scanning.
>
> Activating ASC while using Reverse will switch the Reverse function OFF.
>
> If you recall a Memory channel or the Call channel, and those channels are
> set
>
> up with the
>
> Reverse function switched ON, the ASC will switch OFF.
>
> A
>
>
>
>
>
> display and blinks. Press any key other than the Tuning control while the
>
> I wonder what "press "rev" means, I think they are talking about menu 
> setup,
> but am not sure about the manual's translation, or my understanding.
>