Hello Terry
Does this work fine for QRO?
David
In message <[log in to unmask]>, Terry Robinson
<[log in to unmask]> writes
>Hello all,
>
>I prefer the cheats method. I set the end of the cable up so that the inner
>comes slightly beyond the end of the pin. I then adjust the brade so that a
>little of it will turn back over the outer insulation., this can be tricky
>to judge.
>
>I then put the cable into the plug and twist the plug onto the cable till it
>locks solid. This has caused the inner screw thread to bite into the brade,
>so the whole thing makes a pretty good connection which is mechanically
>sound. I then solder the inner and cut the protruding wire flush with the
>end of the pin.
>
>This is fine for indoor use and, for outdoor, I wrap the hole thing in self
>amalgamating tape, followed by insulating tape, which you'd have to do
>anyway.
>
>No messing about trying to drag brade through the holes, no messing about
>melting everything.
>
>I've not experienced a failure due to that method yet.
>
>73,
>
>Terry, G3WUX
>
>
>************************************************************
>
>DESCRIBE ONLINE - MAKING IT EASIER THROUGH TEXT
>
>WEBSTART could offer an accessible Web solution to your business and leisure
>requirements
>For details of our services, visit:
>
>www.describe-online.com/intro/services.htm
>
>For map and station finder for National Rail and London Underground, plus
>station guides, visit:
>
>www.describe-online.com
>
>For details of our work to date, visit:
>
>www.describe-online.com/intro/portfolio.htm
>
>For details of our proprietor, visit:
>
>www.describe-online.com/intro/cv.htm
>
>Terry Robinson B.Sc
>16 Nibthwaite Road,
>Harrow,
>Middx HA1 1TA
>
>Tel: 020 8861 6909 - Mobile: 07771 610002
--
David W Wood
|