Thanks, Jim.

I'm going to keep this for future reference.

It will be interesting to see what Mike reports back to us on the topic
after he returns from Dayton.

Tom Behler: KB8TYJ


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Jim Shaffer
Sent: Wednesday, May 13, 2015 12:39 PM
To: [log in to unmask]
Subject: Re: 2 meter transverter for TS-590?

From the TS-590 manual:
TRANSVERTER

If you have a transverter that converts the TS-590S operating frequencies to
other frequencies, you can use this TS-590S transceiver as a transverter
exciter. Consult the instruction manual that came with the transverter for
interfacing to the TS-590S transceiver.

FREQUENCY DISPLAY
1.Connect the transverter to the ANT 1, ANT 2, RX ANT, or DRV connector of
the TS-590S.
2.Select the exciter operating frequency on the transceiver.
The transverter will use this frequency as the reference for converting
frequencies.
3.Press [MENU], then press [Q-M.IN]/ [Q-MR] or turn the MULTI/CH control to
access Menu No. 50.
4.Press [M.IN]/ [SCAN (SG.SEL)] to select "1".
The output power is automatically set to the lowest power for that frequency
(default). Refer to "TX POWER" {below}.
5.Press [MENU] to exit Menu mode.
6.Press [ENT], then set the target converting frequency using the numeric
keys.
7.Press [ENT] to complete the entry.

The transceiver displays the target transverter frequency instead of the
actual operating frequency.

Note:
When using a transverter, not all the functions of this transceiver are
available.
When turning the transverter ON, the frequency entry history is cleared,
thus you cannot use the frequency entry history function.
When using an antenna tuner in the IN state and the transverter is turned
ON, the antenna tuner is forced to the THRU state.

TRANSMISSION OUTPUT POWER

If Menu No. 50 is set to "1" {above}, the transceiver automatically
decreases the output power to 5 watts. However, if you do not wish to
decrease the output power, access Menu No. 50 and select "2"; the
transceiver will transmit at full power.

Note: You are responsible for your transmission output power settings.
--
Jim, ke5al
-----Original Message-----
From: Tom Behler
Sent: Wednesday, May 13, 2015 11:11 AM
To: [log in to unmask]
Subject: Re: 2 meter transverter for TS-590?

Wow, that would be something cool to have!

I'll look forward to future posts that give more details on this option.

Sounds like an interesting addition to the home shack.

Tom Behler: KB8TYJ


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of howard kaufman
Sent: Wednesday, May 13, 2015 11:21 AM
To: [log in to unmask]
Subject: Re: 2 meter transverter for TS-590?

Tom, a transverter converts the tx and rx from an HF station to the VHF
band.
I have seen one for the Drake 4 line.
I think the control interface may be unique to a particular radio, I have
questions.
If the 2 meter band is 4 MHZ wide, how is that converted up and down from
say 20 meters, which is 350 KHZ wide.
I have seen the transverter options in the 480 and 590 menus, but have never
seen one in action.


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Tom Behler
Sent: Wednesday, May 13, 2015 10:16 AM
To: [log in to unmask]
Subject: Re: 2 meter transverter for TS-590?

Hi, all.

Can someone help me with a basic conceptual question??

What is a 2-meter transverter that can be used with the TS590?

How does it work, and exactly what does it do?

I know this question may seem elementary to some, but I have never heard of
such a device before.

Tom Behler: KB8TYJ


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Mike
Sent: Wednesday, May 13, 2015 11:10 AM
To: [log in to unmask]
Subject: Re: 2 meter transverter for TS-590?

     Yes, I have one that puts out 100 wats, I was using it with my Ts590.
Now I have a Ts2000 that I use.
I have been thinking of selling mine, because I have the ts2000 for 2
meters.
If you want more information, write, I will be back from Dayton after
Sunday.
Mike
KD2CDU

On 5/12/2015 2:48 PM, Mike Keithley wrote:
> Is there such a thing as a 2 meter tranceiver that works with the TS-590?
Thanks.
> 


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com