that's how I do it too, you have mic control enabled, that's why that works,
most don't by default and you have to enable it in the menu for some strange
reason.
----- Original Message -----
From: "Eric Patterson" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, December 27, 2005 5:26 PM
Subject: Re: tmg707a


I too have a tm-g707.  When I want to set a frequency using the keypad, I
first press the VFO key, which is on the top row of keys and the second key
from the left.  I can then press the a key to the right of the 3, which acts
as the enter key.  From there, I can enter the frequency I want.  When I got
my radio, it was configured so the a key functioned as the enter key.  I
hope this answers your question.

Eric

-----Original Message-----
From: Blind-Hams For blind ham radio operators
[mailto:[log in to unmask]] On Behalf Of Richard Fiorello
Sent: Monday, December 26, 2005 11:21 AM
To: [log in to unmask]
Subject: tmg707a

Hi Everyone;
I bought myself a nice new tmg707a for Christmas and thus far I love it.
True it only hears one band at a time but the ability to easily program a pl
tone is worth it to me.
As usual, however, there is one minor snag.  The voice chip works and the
dimmer button now works as a speak button.  I haven't figured how to program
an enter button in the microphone.  This tuning manually got old by about
the second repeater.
Any info much appreciated.
I took a look at the cheat sheets on I can work this thing and although they
told me I had to
reprogram a enter key the details weren't there.
Rich


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.4/211 - Release Date: 12/22/2005