Hi Bob,
In most menu's so in the CTCS menu as well, you can use the numpad to set the tone you want. For example, to set the CTCS tone for the transmition, you press menu, then 16 to enter the CTCS menu. Then you can press number 9 to set it to 88,5. But I had to figure this one out on my own by trying the different tones until I found the proper one.
Hope that helps,
Christian SM0UWV


On 2010-01-11 at 13:30 Bob Tinney wrote:

>Hi Christian,
>
>Does the voice speak the ctcss/pl tone frequencies?  Also when you switch 
>from receiver a to b, is the frequency of each receiver spoken?  This
>little 
>radio sounds very interesting especially at the price.
>
>Bob Tinney, K8LR, [log in to unmask]
>Skype, bobtinn
>Life is full of challenges, that's what makes it interesting!
>
>----- Original Message ----- 
>From: "Christian" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Friday, January 08, 2010 7:40 PM
>Subject: Links to Wouxun radio
>
>
>Hi all,
>Here are the links for the different dual band Wouxun radios:
>First, here is the link for the KG-UVD1P UH TX136-174/400-480Mhz Dual Band
>http://www.409shop.com/409shop_product.php?id=103954
>http://www.409shop.com/409shop_product.php?id=104056
>http://www.409shop.com/409shop_product.php?id=104100
>73s,
>Christian SM0UWV