BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Butch Bussen <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Tue, 24 Jan 2017 20:38:56 -0800
Content-Type:
TEXT/PLAIN
Parts/Attachments:
TEXT/PLAIN (30 lines)
I don't notice the digital on my 590 or 990, but I don't have hearing 
aids either.  I do notice it on cell phones and don't like it.  One 
reason I'll never run dmr stuff.  Anyhow, if yours is a later 590, gs I 
think it is called, it has a way to hook up a second receiver to a jack 
in the back.  Frank RoderusIf yours is that type, you could find an 
older solid state receiver or a tub rig and key the microphone on the 
590 to spot your transmitter on the receiver.  Not really sure what to 
recommend.  Write off list if I can help.

[log in to unmask]
or
[log in to unmask]
which will show up as from tiny puppy.
Good luck.

On Tue, 24 Jan 2017, Mike 
Keithley wrote:

> Hello list,
>
> This might sound strange, but I'm getting discouraged with the sound from my ST590. It's just a digital sound, and my cochlear implants (being digital devices themselves) just don't handle digitally-generated sound well. I'm seriously thinking of finding an old ham receiver with analog signal processing and putting up with poor selectivity etc.
>
> For example, my iPhone sounds digital, even with a good connection. To a lesser extent, my land line phone, which is actually VOIP through Comcast, also sounds digital. But the digital effect disappears when using my wife's wired landline phone (which I'm sure turns into VOIP along the network).
>
> now the TS590 just sounds digital even with the noise limiter and blanker turned off and listening to AM broadcast stations with broadest selectivity. But my Victor Stream (which is actually digital), sounds more analog and better. In the 590, I can turn the RF gain down to keep an SSB signal from influencing the AGC, and this removes the digital effect somewhat. But I think something got lost in the audio quality (for my ears at least) of modern transceivers. Maybe I'll try building my own receiver, like the regenerative receiver I built in my novice days. That used vacuum tubes and was inspired from an article in the BTP. It wasn't much, but it was analog!
>
> Sorry for the rant. I used to enjoy phone, but it now sounds so gross sometimes that I spend more time on CW and deal with weird digitally-generated effects, which can get rather wild with sharp selectivity.
>
>

ATOM RSS1 RSS2