Subject: | |
From: | |
Reply To: | |
Date: | Fri, 29 Oct 2004 09:53:00 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Howard,
Most Kenwood transceivers with a general coverage receiver automatically put
an attenuator in line when you tune through the broadcast band. I don't
know how many DB the attenuator is, but you can hear it click in when you go
below 160 meters. I know that there mods out there to defeat the automatic
attenuation, but I think that Kenwood did that to keep receivers from being
overloaded by strong broadcast signals.
Bob Tinney, K8LR, [log in to unmask]
"People are like stained-glass windows.
They sparkle and shine when the sun is out,
but when the darkness sets in,
their true beauty is revealed only
if there is light from within."
-Elisabeth Kübler-Ross (1926 -)
----- Original Message -----
From: "Howard Kaufman" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, October 29, 2004 12:28 AM
Subject: kenwood options
Thanks for the idea about the enter key pressing it twice does give the
current frequency. Now the old frequency key gives a talking S meter
reading.
Seems accureate except their must be a lot of attenuation on the broadcast
band. Don't know why but trust me, WGN is not 10 DB over 9 with the
pre-amp turned on.
Thanks again! That is sure fun to be able to get an S meter reading for
the first time in 38 years.
Now I know why my reports often are an S unit louder than the ones I get
back. It's because my ear was off by an S unit.
|
|
|