Hi Rosie,
Most hardware stores sell circuit testers. These will look like a 3 prong plug with
3 lights on the end. Simply plug it in the outlet in question and match the light
pattern to the chart. It will tell you if you have crossed wires or an open ground,
etc.
If the tester shows anything out of the ordinary, I would ask that electrician to
make it good.
I always carry one with me when traveling, I plugged one too many computer into a
faulty motel outlet and the 4.95 is cheap for the peace of mind it brings <g>
Best wishes,
Rick
[log in to unmask]
Rosie Richter wrote:
> I had an electrician in just last month because the outlet where the computer
> is plugged in had a loose wire. It didn't affect the computer but turned off
> everything else that was connected to the other circuit in that plug. (I hope
> that makes sense). Anyway, I'm hoping that because I had someone in so
> recently that the electrical outlet is not the problem. However, I will also
> water the ground outside. I hope my ignorance of electricity isn't showing.
> I think that's what you meant when you said the dirt around the grounding rod
> was dry. (I obviously don't know what or where the grounding rod is. I'm
> assuming the grounding rod would be underground in my yeard. Rest assured, if
> it's something inside the electrical outlet... I won't be watering it. <g>)
>
> Meanwhile, my mouse has stopped shocking me BUT it now freezes up every time I
> boot up and the only way I can get it to work is to go to the control panel and
> then select refresh. I just recently installed a Multi-media keyboard.
> Looking real quick in the control panel, I don't see any conflicts - but, I'm
> only looking for the yellow exclamation mark or devices on the same com
> port. I haven't had a chance to load the software for the keyboard yet.
>
> If the problem is a faulty ground, is it possible the electrician missed it
> when he was out? Is there a way for me to know for sure that is the problem?
>
> Rosie Richter
>
> > Like everyone else, I leapt to the conclusion that the shock you got
> > was an instantaneous static "zap" when you first touched the mouse.
> > Synthetic fabrics like nylon are notorious for generating static, and
> > should be avoided around electronics if possible. You can also safely
> > discharge a static charge by touching a key chain (or other metallic
> > object) to the shiny metal around the power supply at the back of the
> > computer. Just touching the chassis will discharge the charge, but
> > you may feel an objectionable "zap".
> >
> > On the other hand, I want to be sure that it was a static shock, and
> > not the continuous "buzz" or "tingle" that you would experience while
> > making contact with a "leaky" electrical appliance. I have seen
> > circumstances where the dirt around the grounding rod for a building was
> > so dry (and the water table so low) that it was possible to light a neon
> > bulb by touching it to the ground rod. It is possible that a faulty ground
> > connection, combined with a fault somewhere in the building, is making
> > everything that is supposed to be grounded "live". That would be
> > dangerous, and should be fixed immediately.
> >
> > Boyd Ramsay
> >
> > [log in to unmask]
> >
> > The PCBUILD web site always needs good submissions. If
> > you would like to contribute to the website, send any
> > hardware tech tips or hardware reviews to:
> > [log in to unmask]
>
> The PCBUILD web site always needs good submissions. If
> you would like to contribute to the website, send any
> hardware tech tips or hardware reviews to:
> [log in to unmask]
Curious about the people moderating your
messages? Visit our staff web site:
http://nospin.com/pc/staff.html
|