Subject: | |
From: | |
Reply To: | |
Date: | Mon, 31 Jul 2000 08:55:24 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I recently replaced my NIC (a Kingston KNE110TX ) with another (Linksys
"Network Everywhere" NC100) to get my DSL working again. Both are 10/100
Mbps cards.
DSL is working, but I have a new problem that started after replacing the
NIC. When I turn power on to the PC and peripherals (through a master
switch) the drive light comes on on the PC and the monitor power light
glows green. However, there is no "beep" from the PC speaker, and after a
few seconds the drive light goes off and the monitor power light turns
yellow, indicating it's not receiving a video signal.
If I turn power off and back on, the system then boots normally.
The PC is a P200MMX with 128MB of RAM, two hard disks (C:\ is 7.85 GB ["8.4
GB"], D:\ is 3.71 GB ["4 GB"]), a CD-ROM, an internal 33K modem and the
NIC. The monitor is a ViewSonic GT775 17-inch.
BTW, the case is still off the PC.
I don't know if this behavior is connected to the new NIC, or if that's
just coincidence. I would appreciate advice on solving this problem.
TIA,
Larry Gurley
Lawrence T. Gurley, Berkeley, CA
[log in to unmask],
[log in to unmask]
PCBUILD maintains hundreds of useful files for download
visit our download web page at:
http://nospin.com/pc/files.html
|
|
|