Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 28 Jul 1999 08:52:09 -0500 |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
I doubt if AT cases have changed that much since 286s. I bought a
complete 286 in 1990 and used the original case through several upgrades
including to a high-end 486. I do not remember there being any such
drastic differences between that case and newer ones. Of course, it was
a standard size desktop case, not one of those shorter, pizza-box cases
or something similar. It also had a 230 watt power supply same as what
you get in many new cases. However, with that old of a case, I would be
concerned about the age and future reliability of the power supply. New
AT cases can be bought for $30 - 80 and one at the lower end would seem
to be a reasonable guarantee against future problems. I just got an
InWin AT mid-tower for $40 at a local store.
----- Original Message -----
From: Jim Meagher <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, July 28, 1999 7:29 AM
Subject: Re: [PCBUILD] pc case question
> The motherboard might fit, but the auxiliary cards (video, sound, etc)
will
> not.
> The PCI slots will not line up with the holes in the case.
> The card's metal mounting bracket will not fit the case.
> And some of the cards will be too tall.
> And most likely, the Power Supply will not have enough wattage to run
the
> system.
>
> ----- Original Message -----
> From: Scott Berry <[log in to unmask]>
>
> > question for you. Can you put the older Pentium boards in a 286
case I am
> > talking about the mother boards if so how high can I go before they
change
> > to the different case and how much would the cases run?
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://nospin.com - http://nospin.org
|
|
|