Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Fri, 14 May 1999 06:14:55 -0400 |
Content-Type: |
text/plain; charset=us-ascii |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
Jim Gemeinhardt wrote:
> I am building a new PII 350mhz system using the configuration below.
> No operating system currently installed.
> CPU - PII 350 MHz
> Motherboard - ASUS P2B (Has an AWARD BIOS v4.51PG revision 10008)
> SCSI Controller - Adaptec 2049 Ultra Wide V1.25 BIOS
> Quantum Fireball 6.4g SE
> Diamond V550 AGP vide card
>
> I receive a "time our failure during SCSI inquiry" error message when the
> controller attempts to locate the devices on startup, followed by a "SCSI
> BIOS not installed". I went to the SCSI utilities and could not get the
> device to be recognized.
>
> When I attempt to detect the drive, the systems hangs at the SCSI id number
> configured on drive.
>
> The drive is terminated correctly and works fine in another system.
> The controller is brand new.
>
> I get the same results when I put any SCSI drive into the system.
>
> Anybody have any ideas?
>
> TIA
>
> Jim Gemeinhardt
>
> The PCBUILD web site always needs good submissions. If
> you would like to contribute to the website, send any
> hardware tech tips or hardware reviews to:
> [log in to unmask]
Jim:
Sounds like....
cable problem!
An incorrect, defective, or improperly seated cable will cause the problem you
describe.
Good luck.
BTW is the Fireball ID# in conflict with any other SCSI device in your system?
________________________________________________________
NetZero - We believe in a FREE Internet. Shouldn't you?
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html
Curious about the people moderating your
messages? Visit our staff web site:
http://nospin.com/pc/staff.html
|
|
|