Patrick Black wrote:

> Check to see  if the workgroup they're in is the same.
> Also the each adapters bindings (TCP/IP and/or IPX/SPX)
> Check to make sure that you have supplied an IP address
> for TCP/IP.

There is no TCP/IP, IPX/SPX only.

>
> In IPX/SPX check the frame type, and set it to Ethernet 802.3

What the difference between auto and 802.3?? Should auto work?

> Plus when the problem appears check the hub to see if
> they're are any collisons taking place if that is the case.

Seemed ok on hub side when problem appears. Sometimes when problem
appears, swap
cable around may change the situation, but all main cabling is in the
wall.
therefore, it's impossible to completed swap cable.

J Qian

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>