Martin,
The manual for the Linksys EtherFast 10/100 5-port hub that I have says that
"If any of the hub's ports are running at 10MBps, the UPLINK port's DISTANCE
capability drops from 100 meters to 5 meters (16.4 feet) at 100 Mbps. So
the speed is still supported, however you loose 95 meters worth of
separation capability. This may not be an issue in your application. I
have not had an opportunity (or testing equipment for that matter) to check
this out.
Jerry Rasmussen
Rasmussen & Bucklin Associates
Coral Springs FL
[log in to unmask]
======================
At 08:22 PM 6/14/99 , Martin Trevorn wrote:
>I was Considering buying a NETGEAR 8-PORT DS108NA 10/100 AUTOSENSING Hub
but
>someone tell me that when using this king of hub, the system will use the
>speed of the lower NIC. Meaning that if a NIC is 10Mh all the network is at
>10Mh.
>
>Could someone confirm if that is true?
PCBUILD mailing list is brought to you by:
The NOSPIN Group
http://nospin.com - http://nospin.org