There is on problem in having SCSI and IDE devices in the same system. The
problem comes up when you want to boot from the SCSI device. Normally, the
BIOS forces you to boot from the IDE device only. Newer BIOS designs allow
you to set the boot device sequence.
However, even with older BIOS configurations, NT can boot from the SCSI
device by simply setting the CMOS configuration as having no IDE drives
present. Don't disable the IDE in BIOS, just set CMOS hard drive to NONE.
Since NT does not use the BIOS to access the hard drives, it will still see
the IDE drives, but the boot is done through the BIOS, so your SCSI device
performs the boot.
I wrote of my experiences on this some time back. Here is a link to my web
page where you can find my article:
http://www.geocities.com/CollegePark/Lab/8342/pnews/pn-feb97.htm
Also some of my experiences in installing SCSI with IDE:
http://www.geocities.com/CollegePark/Lab/8342/pnews/pn32.htm
Peter
===================================
Peter Shkabara
[log in to unmask]http://www.geocities.com/CollegePark/Lab/8342
-----Original Message-----
I remember way back trying to get a SCSI and and IDE HD to work together
on a couple of NT systems. Couldn't get the combination to work to save
my life. I even presented my question at a local user group and was
told it couldn't be done. I ended up giving the IDEs to one system and
SCSIs to the other.
The PCBUILD web site always needs good submissions. If
you would like to contribute to the website, send any
hardware tech tips or hardware reviews to:
[log in to unmask]