Sender: |
|
Date: |
Tue, 29 Feb 2000 13:52:30 -0500 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
Install the new drive.
Fdisk the new drive and create a primary partition on it.
format the new drive.
Open a dos box in win98 or win95,
type
c:
cd \
xcopy c: d: /r /i /c /h /k /e /y
to copy from c: to d:
if you plan to boot from d: it should have been
formatted with the /s switch. If you remove
c: drive you will need to use fdisk to set the
new disk's primary partition as the active partition,
so have a boot diskette with fdisk.exe on it handy for this.
Xcopy will not work if you boot to dos, the switches
will not be recognized. Win9x loads a 32bit version in a
dos window, but not when the pc is booted to dos.
All the switches are not required,
but the acronym 'richkey' is so convenient to remember,
I always include them all in the instructions.
Tom Turak
-----Original Message-----
Sent: Tuesday, February 29, 2000 12:17 AM
Walter R Worth and Herbert Graf wrote of using XCOPY to copy from one
hard drive to another. It would help if they could give their procedures.
I have used XCOPY a number of times, but not for copying a hard drive.
Demetri Kolokotronis
PCBUILD's List Owner's:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>
|
|
|