Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 13 Oct 1999 23:46:47 +1000 |
Content-Type: |
text/plain; charset=us-ascii |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
Travis Neal wrote:
> I recently purchased a Pacific digital 4xX2xX8x cdr/rw. This device ddint come with any drivers. I can load the generic drivers (thanks to this group's archives) and that will alllow it to read cd's without any problems. However, I cannot run some programs (mainly games which require 32 bit drivers.) I have searched the web site up and down for some drivers and I cannot find any.
I have never seen any CD-RW driver comes with driver disk. As I know, they all use same driver as CD-ROM provided by Windows. (if you look carefully, the only difference is displayed drive name which is taken from hardware)
> I also cannot find who made the drive either. Windows isn't any help either. The drive isnt even detected in the Add New Hardware applet.
Are you using windows 95/98? If so, windows shouldn't have any problem to detect the CD-RW.
Can you try this:
Add "REM" in front of any line in you config.sys and autoexec.bat which refered to CD-ROM. (to do so, you can click "start" -> "run", then type "msconfig", click "ok"); shut down computer; reboot computer, now windows should detect and install driver for it.
I've seen strange problem when 16bit driver is installed, I have a question wanted to ask here:
I understand that AGP card requires at least win95 with USB support to operate (or NT4 with SP3). once I've loaded DOS driver for CD-ROM on a win95a machine, after that, customer's AGP (i740) card worked without any win95 patch. How could this happen? AGP video worked on win95a! (whole story is quite long, it was a customer from hell)
Jun Qian
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://nospin.com - http://nospin.org
|
|
|