I couldn't find the setupx.dll file either.
Every install has started with a format command from
the floppy.  It is a real Win95b CD Rom.

I am kind of at a loss on this one.
Thanks for your help,
Bill Rysanek

-----Original Message-----
From:   Jim Meagher [SMTP:[log in to unmask]]
Sent:   Tuesday, February 10, 1998 11:24 PM
To:     PCBUILD - PC Hardware discussion List
Cc:     [log in to unmask]
Subject:        Re: FW: Win 95b install

William Rysanek wrote:
>
> OK More info on the way.
> It is a new install from a CD Rom.
> Hard drive is a 1 gig WD and it too is new.
> Only previous install has been a few failed attempts.
>
> Out of desparation tonight, I tried to install Win 95 (the original)
> from 3.5 inch disks.  I ran into the same roadblock:
> "Cannot find setux.dll"

William,

I have checked all seventeen file CABs and there is no file
called setupx.* or setux.*.  I even looked at the PLUS cd just
to see if maybe that might be your problem.

I suggest you completely reformat the hard drive and start over,
especially since you say you have already had a few failed attempts.

You might also want to look closely at your CD, is it a genuine
MS CD or is it something that a PC vendor burned themself and sent
out with thier system.

--
Jim Meagher
============================
Micro Solutions Consulting        Web Design, Network Administration
[log in to unmask]                     Hard/software Installation, Service
http://www.ezy.net/~microsol    410-543-8996
============================


          PCBUILD:  http://nospin.com  or  [log in to unmask]