Sender: |
|
Date: |
Thu, 15 Apr 1999 11:41:41 -0800 |
Reply-To: |
|
Content-type: |
text/plain; charset=US-ASCII |
Subject: |
|
From: |
|
Content-transfer-encoding: |
7BIT |
In-Reply-To: |
|
Organization: |
General Magic |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
On 14 Apr 99, at 17:56, Brian.santos wrote:
> Yes, you need a data switch. You can buy this at any PC hardware
> store.
There are three basic problems with this advice:
1. Monitor connections are not really intended to be plugged and
unplugged while the PC is on. A KVM switch includes protective
circuitry to allow this. A "data switch" generally does not.
2. A couple of the lines in a VGA connection carry information about
the monitor to the VGA card. If you boot a PC while the monitor is
switched away, the video card may initialize to a mode that the monitor
can't support. [Admittedly, this is probably only a problem for those
with monochrome VGA monitors, and those are fairly rare.] KVM switches
generally replicate these signals from the monitor back to all of the
attached PCs.
3. I have not seen a "data switch" with 15-pin VGA connectors
(probably for reason 1 above...). I have seen them in 9-pin (you might
be tempted to try to use these with an old MDA or CGA, but they're
really intended for 9-pin ("AT") serial connections), 25-pin
(serial/parallel), and Centronix (printer) configurations.
David G
The PCBUILD web site always needs good submissions. If
you would like to contribute to the website, send any
hardware tech tips or hardware reviews to:
[log in to unmask]
|
|
|