I have a smaller 1.2G drive as my master and I am trying to install a 2.5 G
drive on the same controller as the slave. The motherboard manual(triton
chipset) says it supports drives larger then 528Mbyte. However I didn't
install the master drive which does have a disk manager or overlay
installed on it.
When I try to go into the standard Cmos under normal it does not allow me
to setup the full capacity of the slave drive. If I enable LBA it does not
even allow me to enter any settings of the slave drive. Is there going to
be any problem installing a larger drive as the slave?
I am suspicious that I have an old bios that does not detect the newer
large drives. If so how do I go about installing the new drive? Both drives
will have different disk managers as one is a Western digital and the other
a quantum.
The bios is an award dated april 1995 (2A59CF52) Does this bios support
drives larger then 528Mbyte?
Thanks for any help; ken
Curious about the people moderating your
messages? Visit our staff web site:
http://nospin.com/pc/staff.html