Most motherboard have jumpers to set for PC-100 compliant DIMMs. Also check
the BIOS settings...you may have the thing still looking for 60ns EDO RAM.
Also make sure your DIMM's match (same speed rating, and best to have two of
the same exact chip). Jumpers & BIOS, and always double-check that the
DIMMs are properly seated.
Martin Kurr
email [log in to unmask]
> From: Jose E. Dominguez[SMTP:[log in to unmask]]
> Subject: [PCBUILD] Server Blues
> I upgraded the RAM on a server running Netware 3.12 and here's what
> happened.
> I removed the 32MB in SIMMs that were on the board, and I added two
> 128MB of PC-100, the voltage is
> correct.
> The system boots, counts the whole 256MB and proceeds...<clip>
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://nospin.com - http://nospin.org