On Sun, 13 Sep 1998 11:13:05 -0700, you wrote:

No, it seemed it was the CD-ROM drive problem or incorrect SCSI
configuration. Anyway, here are some suggestions that the original
poseter can try:

First, I want the original poster confirms that he has one or two
CD-ROM drives? If just one only, which ID you've actually configured?

Second, try to enable the LUN support option in your SCSI adapter.
Because I noticed the ASPICD.SYS cannot issued just one DUN for each
ID, but gave you each DUN for your ID instead.

>The problem appears to be with he ASPICD.SYS device driver.

(....)
>        Parity Checking:        Enabled LUN Support:                    Disabled
>        Disconnection:          Enabled Sync Negotiation:               Enabled
(....)
>        Host Adapter #0 - SCSI ID 3 - LUN 0: Matshita CD-ROM CR-5XX     1.0b
>        Host Adapter #0 - SCSI ID 5 - LUN 0: Matshita CD-ROM CR-5XX     1.0b


Regards,
Michael

                                  -----
       **Need help with PCBUILD mailing list? Send an Email to:**
        Bob Wright<[log in to unmask]> or Drew Dunn<[log in to unmask]>